Wireless Industrial Sensors - GetWireless skip to content

WIRELESS 4-20MA CURRENT LOOP SENSOR / BRIDGE

Overview
The 4-20mA sensor uses a 10-bit ADC to measure an analog value between 4 and 20mA with a 10uA resolution. If the measured value rises above or falls below the configured thresholds, an alert is sent over the wireless network. The Armored Sensor™ IP67 weather-proof enclosure makes the sensor suitable for outdoor and industrial use.

The 4-20mA sensor can also be used as a bridge device to enable a wide variety of sensors with only a 4-20mA output. See the article Using Radio Bridge’s 4-20mA Current Loop Sensor to Connect Off-the-Shelf Devices to LoRaWAN for more information.

Features

  • Based on LoRaWAN wireless technology
  • Very long range up to several miles
  • Excellent wireless penetration through structures such as walls and floors
  • Enclosure tamper detection
  • Automatic error reporting through supervisory messages
  • Over the air configuration

Applications

  • Monitoring industrial process control outputs
  • Monitor signaling to control valves
  • General monitoring of a 4-20mA industrial output

WIRELESS IP67 VOLTAGE SENSOR

Overview
The wireless voltage sensor measures voltages between 0-30V with 10mV precision. When the voltage rises above or drops below a threshold, an alert is sent over the wireless network. An indoor/smart building version is also available for low-cost applications.

Features

  • Based on LoRaWAN wireless technology
  • Very long range up to several miles
  • Excellent wireless penetration through structures such as walls and floors
  • Enclosure tamper detection
  • Automatic error reporting through supervisory messages
  • Over the air configuration

Applications

  • Lead acid battery monitoring
  • Power outage detection
  • Wireless voltmeter
  • General purpose voltage sensing

 

Questions? Our team has the knowledge and experience to help you get it right.

Talk to a Product Expert